Martin ATOMIC 3000 Manual de usuario

Atomic 3000user manualTM

10 Lamp Atomic 3000 user manual LAMP REPLACEMENTEnd of life can be confirmed with the Flash LED on the rear panel. The LED flashes dimly with each tri

Atomic 3000 user manual Controller operation 11CONTROLLER OPERATION4This section describes how to operate the Atomic 3000 with a DMX controller. DATA

12 Controller operation Atomic 3000 user manual DMX CONTROL MODESThe DMX control options are selected on the Mode DIP switch. 1-channel DMX mode allow

Atomic 3000 user manual Controller operation 13Find the address in the table. Read the settings for pins 1 - 5 to the left and read the settings for p

14 Controller operation Atomic 3000 user manual DMX CONTROL SUMMARYFor specific command values, see “DMX protocols” on page 23.INTENSITYFlash intensit

Atomic 3000 user manual Controller operation 15whenever the combination of flash duration and rate prevents pauses between flashes. For example, the b

16 Stand-alone operation Atomic 3000 user manualSTAND-ALONE OPERATION5This section describes how to operate the Atomic 3000 in stand-alone mode withou

Atomic 3000 user manual Stand-alone operation 17 REMOTE ON/OFFSimple on/off remote control of the fixture can be achieved by connecting a switch or re

18 Remote controls Atomic 3000 user manualREMOTE CONTROLS6This section describes how to operate the Atomic 3000 with optional Martin remote controls.

Atomic 3000 user manual Remote controls 19 ATOMIC DETONATORThe optional Detonator remote control provides the following:• Slider controls for flash ra

© 2001-2007 Martin Professional A/S, Denmark. Information subject to change without notice. Martin Professional A/S and all affiliated companies discl

20 Remote controls Atomic 3000 user manualThe remote control is powered by a “master” fixture via the data connection. The Detonator master fixture is

Atomic 3000 user manual Remote controls 21To program a multi-fixture chase1 Connect the fixtures and Detonator. 2 Select the fixture to start the flas

22 Service Atomic 3000 user manualSERVICE7Warning: High voltage! Do not remove the rear panel. There are no user-serviceable parts inside. FUSE REPLA

Atomic 3000 user manual DMX protocols 23DMX PROTOCOLSA 1-CHANNEL DMX MODE 3 AND 4 CHANNEL DMX MODESChannel Value Percent Function10 - 56 - 249250 - 25

ATOMIC 3000 SPECIFICATIONSBPHYSICALSize (without bracket) . . . . . . . . . . . . . . . . . . . .245 x 425 x 240 mm (9.7 x 16.7 x 9.5 in)Weight . . .

Atomic 3000 user manual Atomic 3000 specifications 25ACCESSORIESAtomic Detonator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disposing of this productMartin products are supplied in compliance with Directive 2002/96/EC of the European Parliament and of the Council of the Eur

www.martin.dk • Olof Palmes Allé 18 • 8200 Aarhus N • DenmarkTel: +45 8740 0000 • Fax +45 8740 0010

Atomic 3000 user manual 3ContentsSafety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Preparation for use. . . .

4 Safety information Atomic 3000 user manualSAFETY INFORMATION1Warning: This product is for professional use only! It is not for household use.The At

Atomic 3000 user manual Safety information 5• Keep all combustible materials (for example fabric, wood, paper) at least 0.5 meters (20 inches) away fr

6 Preparation for use Atomic 3000 user manualPREPARATION FOR USE2 UNPACKINGThe Atomic 3000 comes with the following items:• Martin MAX-15 or MAX-7 xen

Atomic 3000 user manual Preparation for use 7• Following the cord cap manufacturer’s instructions, connect the yellow and green wire to ground (earth)

8 Preparation for use Atomic 3000 user manualTo rig the fixtureWarning: Always use a secure means of secondary attachment!Before installing, verify t

Atomic 3000 user manual Lamp 9LAMP3This section describes the lamp options, the lamp power setting, and how to replace the lamp. The lamp is electroni