Martin DMX 5.3 Splitter Manual de usuario descargar pdf (Pagina 7)

Introduction 7

Introduction

Thank you for selecting the Stagebar 2™, a modular LED-based color changer and pixel display fixture from

Martin™. This product features:

• Cree XP-E high-power LEDs

• 150 watts total LED output per fixture at 25° C (77° F)

• RGBAW (red, green, blue, amber, white), and RGB color mixing, HSIC (hue, saturation, intensity, color

temperature) and HSI color management

• 54 LEDs arranged into 6 pixels per fixture

• Individual (6 x 1) or grouped (1 x 6, 2 x 3 or 3 x 2) pixel control

• DMX 512A control

• Control data in/out via 5-pin XLR connectors

• Control panel and full text backlit LCD display with battery power for offline setting and addressing

• Auto-sensing power supply unit with 100 - 240 V, 50/60 Hz operating range

• Daisy-chainable power link

• Power in/out via Neutrik PowerCon locking connectors

• Quarter-turn fastener mounting points

• Narrow diffuser front supplied

• Short (Stagebar 2 S) and long (Stagebar 2 L) models. To simplify the combination of different models in

installations, three short models have the same length as two long models.

The Martin Stagebar 2 is based on the successful Stagebar 54 that was launched in 2007, but the Stagebar

2 has been extensively revised. Besides new, more powerful LEDs and newly designed lenses with a tighter

beam angle, the Stagebar 2 features 5-pin XLR instead of RJ-45 DMX data connectors.

For the latest firmware updates, documentation, and other information about this and all Martin

Professional™ products, please visit the Martin website at http://www.martin.com

Comments or suggestions regarding this user manual may be e-mailed to service@martin.dk or posted to

Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.

This device complies with Part 15, Class A of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le

Matériel Brouilleur du Canada.

Unpacking

The following items are included with the Stagebar 2:

• Neutrik PowerCon power input connector

• Opal front cover

• Narrow-angle diffuser filter

• Omega rigging clamp attachment bracket with quarter-turn fasteners

• This user manual

Using for the first time

Before applying power to the fixture:

• Read the “Safety Information” section that starts on page 3.

• Check that the local AC power voltage is within the ranges listed on the serial number label and in “AC

power” on page 9.

• Install the supplied Neutrik PowerCon power input cable connector on a suitable power cable as

described in “Connecting to power” on page 9.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentarios a estos manuales

Sin comentarios

Martin DMX 5.3 Splitter Manual de usuario Pagina 7

Comentarios a estos manuales