Martin MAC 600E Manual de usuario descargar pdf (Pagina 12)

MAC 600 (E) NT

DMX mode and address

The DMX mode options are described under “DMX-512 control” on page 20. Maximum flexibility is provided in

mode 4.

The address, also known as the start channel, is the first channel used to receive instructions from the controller. For

independent control, each fixture must be assigned its own control channels. Two MAC 600 (E) NTs may share the

same address, however, if identical behavior is desired. Address sharing can be useful for diagnostic purposes and

other situations, particularly when combined with the inverse pan and tilt options.

To set DMX mode and address

1 Switch on the fixture.

2 If the fixture is in a flight case, press [MENU] and [ENTER] at the same time to disable pan and tilt reset. (A

partial reset can take 2 - 3 minutes and error messages will be displayed.)

3 Press [MENU] once to enter the main menu.

4Select

PSET and press [ENTER]. Scroll to the desired DMX mode (1, 2, 3, or 4) and press [ENTER].

5Select dAdr from the main menu and press [ENTER]. Scroll to the desired DMX address and press

[ENTER].

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

Martin MAC 600E Manual de usuario Pagina 12