Martin EFX800 Manual de usuario descargar pdf (Pagina 10)

10 Mania EFX user manual

Power plugs

Mania EFX fixtures are supplied with power cables to match most local

power outlet sockets (see “Included items” on page 51), but if there is no

power plug that matches your socket type, install a suitable grounding-

type (earthed) power plug on the power cable. Consult a qualified

electrician if you have any doubts about proper installation.

Follow the power plug manufacturer’s instructions, connecting the

appropriate wires to ground (earth), live, and neutral. The table below

shows some common wire identification schemes.

Physical installation

Each Mania EFX fixture must be either:

• fastened to an overhead structure by means of its mounting plate and a

Martin rigging clamp (available from your Martin dealer), or

• fastened to a surface by means of its mounting plate and suitable bolts.

Do not install the fixture by any other means, as this can cause the fixture

to overheat.

Ensure that the mounting structure or surface and all fasteners used can

support at least 10 times the weight of all installed fixtures, clamps,

cables, auxiliary equipment, etc.

Ensure that the fixture is located:

• at least 1 meter (3.3 ft.) away from the surface to be illuminated,

• at least 0.1 meters (4 in.) from any combustible materials (wood, fabric,

paper, etc.) and

• well away from any flammable materials.

Ensure that the clearance around the fan and air vents is at least 0.1

meters (4 in.) and that airflow is free and unobstructed.

Warning! Block access below the work area and work from a stable

platform when installing or servicing the fixture.

Function Wire (EU) Wire (US) Marking Screw color

live brown black “L” yellow or brass

neutral blue white “N” silver

ground (earth) yellow/green green green

Table 1: Cord cap wiring

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Sin comentarios

Martin EFX800 Manual de usuario Pagina 10