Martin MAC 500 Manual de usuario descargar pdf (Pagina 23)

Routine maintenance 23

4. Position the head top side up so that you have access through the top. Holding the focus lens by its

base, slide it out it to its limit at the front of the fixture as shown in Figure 15.

5. Flip the head upside-down. Move the prism lens to its forward limit by pulling on its belt as shown in

Figure 16.

6. Flip the head top side up again. To avoid bending the gobo animation wheel when you remove the

module, move the wheel in towards the center of the module by inserting a finger and rotating the

positioning belt idler pulley at the top of the module as shown in Figure 17.

Head top side up

Figure 15: Moving the focus lens forward

Figure 16: Moving the prism lens forward

Head upside down

before taking out the gobo-color modul

ebefore taking out

the gobo-color

module

Figure 17: Retracting the gobo animation wheel

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Sin comentarios

Martin MAC 500 Manual de usuario Pagina 23