Martin MAC 500E Manual de usuario descargar pdf (Pagina 8)

MAC 500/E User Manual

1. Connect the controller’s data output to the MAC 500/E’s data input. For a

• DMX controller with 5-pin output: use a cable with 5-pin male and 3-pin female connectors such

as P/N 11820005. Pins 4 and 5 are not used.

• DMX controller with 3-pin output: use a cable with 3-pin male and female connectors such as the

one supplied.

• Martin RS-485 Protocol controller: use a phase-reversing cable, such as P/N 11820006, with 3-

pin male and female connectors or reconfigure the XLR output.

2. Continue the link: connect the output of the fixture closest to the controller to the input of the

next fixture. Use a phase-reversing cable when connecting a DMX-standard (pin 3 +) device to a

Martin-standard (pin 3 -) device.

3. Insert a male 120

Ω

XLR termination plug in the output of the last fixture on the link.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sin comentarios

Martin MAC 500E Manual de usuario Pagina 8