Martin RoboColor III Guía de usuario descargar pdf (Pagina 13)

Delete sequence

1 To delete a

sequence

, enter edit-sequence mode, by pressing [edit seq], as if you

were about to edit an existing

sequence

2 Find the

sequence

you wish to delete by pressing [↑]or[↓], or, use the joystick.

3 Press [enter] to select the sequence for deletion (or editing) and the display will show

{Pr }.

4 If you wish to delete the

sequence

press [edit seq] again. The display will now flash {dE

5 You may cancel by pressing [enter] or confirm by pressing [↑] and [↓] at the same time.

The display shows {dE } until the

sequence

is deleted. You may now select a new

sequence

to be edited or deleted.

NOTE Sequences that are deleted but still referred to in shows will be replaced by the

sequence with the lowest sequence number during execution in Run Show.

Edit trig-rate

As some

sequences

look better at a higher

trig rate

than others, you may program the rate

by pressing [auto] and tapping [trig] at the preferred rythem. This

trig rate

may be used

when the

sequence

is executed in run-sequence or run-show mode, and is set to the

period of time between that last two pushes of the trig button. If you do not set the

trig rate

now, a default

trig rate

will be used. You may change this default setting by entering and

editing the

sequence

and setting a new

trig rate

Edit sequence hints

When you are programming the Units you will discover that only the keys you press have

affect on the functions of the Units selected. For example:

If you press [color] and then use the joystick while Unit number 1, 2 and 3 are

selected all these Units will change to the same color and all other remaining

functions such as

pan

and

tilt

will be unchanged.

Be aware of which Unit(s) you have selected when activating a function as only those, but

all of these selected Units will be affected.

Page 14 Version 2.1/3.1 Martin 2308 Controller

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

Comentarios a estos manuales

Sin comentarios

Martin RoboColor III Guía de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Reflectores Martin RoboColor III