Martin SynchroZap QX250 Manual de usuario descargar pdf (Pagina 9)

9

BUTTON FUNCTIONS

Button Function

Is used to blackout all the fixtures.

To re-activate the fixtures, press

again. If you press and hold this button then it

operates as the

button.

When you press and hold , you can access

the second functions on other buttons

(indicated with yellow text).

operates like

the shift key on a computer keyboard.

Each time is pressed a trigger will be

sent and the next scene in the pre-programmed

sequence will start.

is used to align the MX-x scanners.

See “Aligning MX-x fixtures” on page 15.

To use this function, hold down the

button, and then press

.

Tap a number of times to input a trigger

rate manually. The rate at which you tap the

button is used as the trigger rate.

Alternatively, if you press

once and hold

it for a second, the default trigger rate for the

pre-programmed sequence will be used.

In auto trig mode the trig rate is not

synchronized with the music.

During auto trig mode, the associated

indicator in the LED display will blink at the

trig rate.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Comentarios a estos manuales

Sin comentarios