Martin MAC 250 ENTOUR Manual de usuario descargar pdf (Pagina 5)

MAC 250 Beam Installation Note 5

12. See Figure 9. Clip the new

front lens assembly securely

onto its mounting bracket in

the front of the head.

13. Stick the warning

label supplied in

the Kit onto the

back of the head as

shown in Figure 10.

With the Beam Kit

installed, this label

replaces the

warning printed on

the standard MAC

250 Wash. Do not

illuminate any

surface within

3.5m (11ft. 6ins.)

of the MAC 250

Beam. Do not

allow the front

lens to point at

the sun.

14. Finally, before using the fixture, update the fixture software to version 1.4.0 or later, following the

software update instructions in the MAC 250 Wash user manual. From software v.1.4.0, the frost

filter is moved very slightly forward in order to reduce reflections from the CMY flags. There is no

need to roll back the software to an earlier version than v.1.4.0 if the fixture is returned to a standard

MAC 250 Wash configuration at a future time.

The front lens assembly must be unclipped and removed from the head when the fixture is packed in a

MAC 250 flightcase. We recommend that you re-use the assembly’s protective packaging supplied in

the MAC 250 Beam Kit and store the assembly in the tray in the flightcase.

Figure 9

Figure 10

1 2 3 4 5 6 7 8

Sin comentarios

Martin MAC 250 ENTOUR Manual de usuario Pagina 5