Martin MAC 300 Manual de usuario descargar pdf (Pagina 6)

Description

The MAC 300 is an automated yoke-

mounted Fresnel washlight employing a

250 Watt discharge lamp. It provides

cyan, magenta, and yellow (CMY) color

mixing, separate color wheel with 6

replaceable dichroic filters, variable

zoom effect, strobe effects up to 14 Hz,

full-range dimming, and accurate 16-bit

movement. Efficient optics, attractive

design, modular construction and

numerous other features make the

MAC 300 well suited for any lighting

application calling for color mixing

and a soft-edged beam in a 250 Watt

fixture.

Physical

•

Length: 330 mm (13.0 in)

•

Width: 384 mm (15.1 in)

•

Height (head at tilt limit):

536 mm (21.1 in)

•

Weight: 19.9 kg (43.9 lb.)

Source

•

Lamp: 200 or 250 W discharge

•

Base: GY 9.5

•

Approved models: Philips MSD 250/2,

Osram HSD 250

•

Control: automatic and/or remote

on/off

Performance

•

Light output: (new MSD 250/2, no

effects applied): 4800 lumens

Thermal

•

Maximum ambient temperature (Ta):

40° C (104° F)

•

Maximum lamp-socket temperature:

150° C (302° F)

•

Maximum shell surface temperature:

90° C (194° F)

•

Total heat dissipation: 1126 Btu/hr

Control and programming

•

Data pinout: pin 1 shield, pin 2 cold (-),

pin 3 hot (+)

•

Receiver: Opto-isolated RS-485

•

Setting and addressing via: LED

control panel, MP-2 Uploader

•

Protocols: USITT DMX-512 (1990),

Martin RS-485

•

Movement control: tracking and/or

vector

•

DMX Channels: 9 - 13

•

Data input: locking 3-pin XLR male

socket

•

Data output: locking 3-pin XLR female

socket

AC Supply

•

AC input: 3-pin IEC male socket

•

Wiring options: 100/120/210/230/

250 V, 50/60 Hz

•

Maximum power and current: 330 W,

3.1 A @ 120 V; 330 W, 1.6 A @ 230 V

Design standards

•

Canadian safety: CSA C22.2 NO 166

•

EU EMC: EN 50 081-1, EN 50 082-1

•

EU safety:EN60598-1, EN 60598-2-17

•

US safety: ANSI/UL 1573

Electromechanical effects

•

Cyan filter: 0 - 100%

•

Magenta filter: 0 - 100%

•

Yellow filter: 0 - 100%

•

Color wheel: 6 colors + open and

split positions

•

Dimmer: 0 - 100%

•

Shutter: 0 - 14 flashes per second

•

Zoom diffuser: 0° - 17°

•

Pan: 540° in 0.013° steps

•

Tilt: 265° in 0.007° steps

Construction

•

Housing: UV-resistant fiber-rein-

forced composite

•

Finish: black, integral color

•

Protection factor: IP20

Installation

•

Mounting points: 2 pairs of 1/4-turn

locks, offset 90°

•

Orientation: any

•

Minimum installation distance,

center-to-center: 368 mm (14.5 in)

•

Minimum distance to combustible

materials: 0.4 m (16 in)

•

Minimum distance to illuminated

surfaces: 0.4 m (16 in)

Ordering information

•

MAC 300 in cardboard: 90225400

•

MAC 300, flight case: 90225401

Included items

•

Omega bracket, MAC 250/300,

1/4-turn: 91602000

•

XLR cable, 5 m, black, 3-pin:

11820008

•

Mains cable, 3 m, IEC 3-pin:

11501013

•

User manual: 35000075

Accessories

•

Flight case, 4 x MAC 250/300:

91510005

•

Flight case, 2 x MAC 250/300:

91510004

•

MP-2 Uploader: 90758420

•

G-clamp: 91602003

•

Half-coupler clamp: 91602005

•

Wide angle diffuser lens kit: 91610016

•

Color filters: 38 available, please

refer to user manual

•

Outdoor Protection Dome: 90525010

•

The Martin Wife: 91611038

•

The Martin King Dome

Specification

General

The luminaire is an automated yoke-

mounted washlight with a subtractive

cyan, magenta, and yellow color mixing

system, six-position color wheel, full-

range dimmer, and variable field angle.

It employs a 250 Watt discharge lamp

as the light source.

Mechanical effects

The luminaire provides subtractive

cyan, magenta, and yellow color mixing

plus a wheel with six positions for

interchangeable dichroic glass filters.

Output intensity is regulated from 0 to

100% in 256 steps by a mechanical

dimmer / shutter that opens and closes

at speeds up to 14 flashes per second.

The moving yoke pans 540° and the

head tilts 265°.

The diameter of the luminaire's light

beam is adjustable through a range of

18° to 35° through the application of a

variable diffuser. (Optional)

The luminaire is supplied with a wide-

angle diffuser lens that provides ad-

justable beam angles from 59° to 67°.

The position of all mechanical effects

excluding the dimmer and frost filter is

monitored by a position feedback

system capable of automatically retur-

ning the effects to programmed values.

Control

The luminaire responds to command

signals conforming to either the USITT

DMX512 (1990) standard or the Martin

RS485 standard. All user-selected soft-

ware settings are adjustable via an

onboard control panel with LED display

or via data cabling in conjunction with

a remote control unit. The luminaire

has two locking 3-pole XLR connectors

for serial data transfer.

Performance

When fitted with a new MSD 250/2

discharge lamp, and with no colors or

frost applied, the luminaire emits a

total luminous flux of 4765 lumens in a

beam 18° wide, where the outside

edge of the beam is defined as the

circle having one-tenth the intensity of

the beam's midpoint.

Housing

The exterior of the luminaire is

constructed of high-temperature UV-

resistant fiberglass-reinforced nylon

with integral black color. The housing

provides a protection factor of IP 20.

Installation

The luminaire operates in any orienta-

tion. It is supplied with a bracket to

which mounting clamps may be bolted.

The bracket attaches to the base with

quarter-turn fasteners such that the

luminaire may be installed at any incre-

ment of 90° in a plane parallel to the

structure. When installed above floor

level, a secondary attachment is fast-

ened to an attachment point in the

luminaire’s base.

Electrical

The luminaire operates, within a tole-

rance of five percent, on 50 and 60 Hz

supplies at 100, 120, 210, 230, and 250

volts. It is fitted with a three-prong

male IEC socket for connection to AC

power. The luminaire must be electri-

cally grounded.

The luminaire conforms with CE safety

standards EN 60598-1 and EN 60598-2-

17, and with CE electromagnetic com-

patibility standards EN 50 081-1 and

EN 50 082-1. Units intended for use in

North America are cETL certified for

compliance with CSA standard C22.2

No. 166, and ETL certified for comp-

liance with ANSI/UL standard 1573.

(Certification pending.)

Environmental

The luminaire must be located in a dry

area in which the ambient temperature

does not exceed 40° C (104° F).

Physical

Size (head at tilt limit): 384 x 330 x 536

mm (13.0 x 15.1 x 21.1 in.)

Weight: 19.9 kg (43.9 lb.)

For a MAC 300 specification quote, see the Service

and Support page on the Martin website:

www.martin.dk

Specifications

Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • Internet: www.martin.dk

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

Martin MAC 300 Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj Martin MAC 300