Martin MAC 300 Manual de usuario descargar pdf (Pagina 18)

18 MAC III Profile user manual

• DIMMING CURVE provides four dimming options (see Figure 11):

- Optically linear – the increase in light intensity appears to be linear as DMX value is increased.

- S-curve (voltage RMS) – light intensity control is finer at low levels and high levels and coarser at

medium levels. This curve emulates the RMS voltage dimming characteristics of an incandescent lamp

such as the tungsten halogen lamp of the Martin™ MAC TW1™.

- Square law – light intensity control is finer at low levels and coarser at high levels.

- Inverse square law – light intensity control is coarser at low levels and finer at high levels.

• DMX LAMP OFF and DMX RESET define whether the lamp

can be powered off, or whether fixture or individual effects can

be reset by sending a DMX command on channel 26 in 16-bit

mode or 29 in 16-bit extended mode. If either of these settings

are set to OFF, you can override this setting and cut lamp

power or execute resets anyway by applying a special

combination of DMX values (see “MAC III Profile DMX

protocol” on page 38).

• PARAMETER SHORTCUTS determines whether the gobo

wheels and color wheel take the shortest path between two

positions (shortcuts enabled), crossing the open position if

necessary, or always avoid the open position (shortcuts

disabled).

• DISPLAY determines whether the display remains on permanently, or goes into sleep mode 2, 5 or 10

minutes after the last movement of the jog wheel or Escape button.

• DISPLAY INTENSITY lets you define the brightness of the backlit graphic display. Select Auto for

automatic adjustment to match the ambient light level, or manually set the intensity to a level from 0% to

100%.

• DISPLAY ROTATION rotates the display through 0°, 90°, 180° or 270° so that it can be read easily no

matter how the fixture is oriented.

• ERROR MODE enables or disables error warnings. If set to Normal, the display is activated and lights up

if the fixture needs to report an error. If set to Silent, the fixture does not light the display with error

warnings but error messages can still be read when the display is activated manually. In both Normal and

Silent modes, the status LED in the jog wheel lights amber to indicate a warning and red to indicate an

error.

Factory settings

FACTORY SETTINGS lets you restore the fixture’s default setup options. Effect calibration is not affected,

so any effects that have been re-calibrated will not be returned to factory calibration settings.

Fixture information readouts

The following fixture information can be called up in the display:

• FIRMWARE VERSION and FIRMWARE REVISION display

the currently installed fixture software version and revision.

• FIXTURE MAC ID displays the fixture’s factory-set MAC

(Media Access Control) address.

• RDM UID displays the fixture’s factory-set unique ID for

identification in RDM systems.

• POWER ON TIME provides two counters:

Output

DMX % DMX % DMX % DMX %

Output

Optically linear S-curve Square law Inverse square law

Figure 11: Dimming curve options

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comentarios a estos manuales

Sin comentarios

Martin MAC 300 Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj Martin MAC 300