Martin MAC 250+ Manual de usuario descargar pdf (Pagina 16)

MAC

250 and

MAC

250

Gobo orientation

Figure 7 shows the correct orientation for different gobo types. When in doubt, install gobos with the more reflective

side towards the lamp.

Changing color filters (

MAC

250

only)

Disconnect the fixture from AC power and allow it to cool.

Remove the top head shell as shown in Figure 5.

Turn the color wheel so the desired color filter is in front of the

access hole. Press the filter forwards slightly to release it and then

grasp it by the edges and remove.

To insert a filter, slide it under the retention spring until it snaps into

place.

Replace the top head shell.

Coated Glass Gobos

Uncoated side towards stageCoated side towards lamp

When an object is held up to the

coated side there is no space between

the object and its reflection. The back

edge of the gobo cannot be seen

when looking through the coated side.

When an object is held up to the

uncoated side there is a space between

the object and its reflection. The back

edge of the gobo can be seen when

looking through the uncoated side.

Textured side towards stage

Textured Glass Gobos

Smooth side towards lamp

Metal Gobos

Reflective side towards lamp Black side towards stage

Image/text Gobos

True image towards lamp Reversed image towards stage

Figure 7: Gobo orientation

Figure 8

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Sin comentarios

Martin MAC 250+ Manual de usuario Pagina 16