Martin RoboColor III Manual de usuario descargar pdf (Pagina 11)

User Manual Controllable Functions 11

ONTROLLABLE

UNCTIONS

This section briefly describes the various functions that can be remotely

controlled via the serial data input on the RoboColor III system.

BLACKOUT

The default position of the color wheel is the blackout position. This means that

no light is emitted from the unit until the wheel is moved from this position.

COLORS

Each RoboColor III head has 11 dichroic colors plus white, all placed on a color

wheel. You can select these colors individually on any of the heads.

COLOR SPLIT EFFECTS

By placing the color wheel between two adjacent colors, color split effects can be

achieved.

COLOR SCROLLING

When switching from one color to another you can reduce the speed to emphasize

the scrolling effect.

COLOR STROBE

Strobe between two adjacent colors is achieved by first selecting a color and then

activating the strobe. The color wheel will then strobe between the color selected

and the next color on the wheel. E.G. to make a black/white strobe, select the

blackout position on the color wheel and activate the strobe. You can adjust the

strobe rate to a desired frequency.

STAND-ALONE

The built-in stand-alone programs can be activated from the controller.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sin comentarios

Martin RoboColor III Manual de usuario Pagina 11