Martin MAC 250 ENTOUR Manual de usuario descargar pdf (Pagina 20)

20 MAC 250 Krypton/Entour

Fixed gobos (MAC 250 Entour only)

The MAC 250 Entour provides 10 fixed gobo positions (plus open).

REPLACING A FIXED GOBO

Danger! Intense heat. Avoid contact by persons and materials. The exterior of the fixture can get

very hot - up to 120° C (248° F). Disconnect the fixture from AC power and allow it to cool

for at least 45 minutes before handling.

Do not removing covers while the fixture is powered on as this exposes dangerous live

electrical circuits, hot surfaces, and a lamp under high pressure.

1 Disconnect the fixture from AC power and allow it to cool.

2 Remove the top cover of the fixture head using a flathead screwdriver to loosen the four quarter-turn

screws. The top and bottom cover look the same, but the top cover is found by checking if the text on the

back of the head is oriented correctly (top) or not (bottom) as illustrated here.

3 Turn the gobo wheel to access the desired position.

Position Gobo

1 Oriental fire

2Wiggles

3 Pear drops

4 Brush strokes

5 Lashes

6 Splash

7 Crazed

8 Dibs

9 Sharp breakup (large)

10 Zeds-a-leaping

Table 3: Fixed gobos

Minimum

dist

ance to flammMinimum

dist

ance to flamm

Minimum

dist

ance to illumina

Maximum

ambient te

Exterior surface to

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

Sin comentarios

Martin MAC 250 ENTOUR Manual de usuario Pagina 20