Martin MAC 250 ENTOUR Manual de usuario descargar pdf (Pagina 27)

Optical configuration 27

4 Remove the three Phillips screws and lift the plate off the effect module.

5 Remove the four Phillips screws.

6 Lift the lens module plate off the effect module.

7 Remove the three Torx 10 screws holding the lens in place.

8 Place the 14° lens between the standard lens and the plate and replace the three Torx 10 screws.

9 Perform these steps in reverse, returning the components to their correct positions and replacing all the

covers, before applying power to the fixture.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

Sin comentarios

Martin MAC 250 ENTOUR Manual de usuario Pagina 27