Martin MiniMAC Maestro Manual de usuario descargar pdf (Pagina 27)

General operation 27

they are installed in sandy or dirty environments. Never try to modify the

light beam by covering the center of the front glass or sticking anything on

the front glass.

Exterior 600 barn doors accessories shape the beam by masking the edge

of the front glass. This solution is problem-free and is recommended if beam

shaping is required.

The LEDs and fixture operating

status

Two LEDs on the rear panel display the

fixture status. Normal operation is indicated

by two green LEDs. See Table 1 for other

status messages.

The LEDs flash off for a brief instant at

regular intervals to prevent false readings

when the light sensor samples the light level.

The three-digit version number (major.minor.build) of the installed firmware

is displayed by the LEDs on power up; the number of:

• Red flashes in LED 1 indicate the major number, followed by,

• Green flashes in LED 2 indicate the minor number, followed by,

• Red flashes in LED 2 indicate the build number (only used for beta

releases)

For example, if the firmware version is 1.3.0, LED 1 flashes red once and

LED 2 flashes green three times.

Appearance Message, LED 1 Message, LED 2

Steady green Effects OK Data OK.

Steady red - Invalid data/no data

Steady yellow Waiting for upload, or

upload in progress

Waiting for upload, or

upload in progress

Flashing yellow Reset in progress Reset in progress

Flashing red & green Contact a service

technician

Off - No data detected

Table 1: LED status messages

LED 1 LED 2 SENSOR

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

Sin comentarios

Martin MiniMAC Maestro Manual de usuario Pagina 27