Martin MiniMAC Maestro Manual de usuario descargar pdf (Pagina 35)

Programming from a PC using MUM 35

Programming from a

PC using MUM

The programming of scenes, and setting up of master/slave relationships,

can be performed from a personal computer using the MUM application.

The computer is connected to a fixture via a DABS1 USB-to-XLR adaptor,

used to program the stand-alone settings for that fixture, and then removed.

Once a fixture is subsequently switched on it can automatically run the

scenes in its program in a loop, according to the triggering criteria you have

specified (time of day, and/or light level).

If you are not familiar with the use of MUM, then it is recommend that you

familiarize yourself with it by reading the MUM user manual.

Getting started

To get started:

1. Connect a DABS1 adaptor to your PC.

2. Connect the DABS1 adaptor to your Exterior 600.

3. Power on the Exterior 600 and start the MUM application. The

application will automatically detect an Exterior 600 if it is powered-on

and connected to your computer via a DABS1 adaptor. It will also

retrieve the current settings on the fixture and display them.

DABS1

Exterior 600

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Sin comentarios

Martin MiniMAC Maestro Manual de usuario Pagina 35