Martin MiniMAC Maestro Manual de usuario descargar pdf (Pagina 46)

46 Preparing a fixture for DMX control

Preparing a fixture

for DMX control

There are a range of DMX specific settings that you need to set. These are

described in this chapter. You can use a personal computer (via the MUM

application), an MP-2 or a DAD to prepare your Exterior 600. We

recommend using the MUM because it has a graphical user interface that is

easy to use (see the following illustration).

Follow the instructions in “Fixture settings” on page 21 to choose and

connect a setting device and then refer to this chapter for information about

DMX specific settings.

DMX address

The DMX address, also known as the control address, or start channel, is

the first channel used to receive instructions from the controller. Each fixture

needs its own control address set, and uses this address and subsequent

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Sin comentarios

Martin MiniMAC Maestro Manual de usuario Pagina 46