Martin MAC 250+ Manual de usuario descargar pdf (Pagina 12)

12 MAC 250 Wash

• , the pan and tilt invert menu, allows you to swap the pan and tilt channels (→), invert

pan movement (

→), and invert tilt movement (→). These options can be useful in

situations where you want some fixtures to mirror the performance of others with the same DMX address,

or when fixtures are not oriented as programmed.

•

, the pan/tilt speed menu, provides 2 settings:  and  (normal). The  setting

provides maximum speed on controllers with high DMX output refresh rates (e.g. a recent PC and Martin

LightJockey software). The

 setting gives smoother, more precise movement with less powerful

DMX controllers as well as the option of longer fade times, for theater use for example. Pan/tilt speed is

set to

 by default.

•

, the effects speed menu, provides 3 settings: ,  and  (Pan Tilt Speed Slave).

The

 and  settinsg are similar to  (see above). If set to , effects speed copies

the pan/tilt speed setting. This lets you set effects speed and pan/tilt speed with one instruction from your

DMX controller.

• In the

 (personality) menu,  determines whether the color and gobo wheels scroll past open

when changing positions. When set to

, the wheels can “take a shortcut” and scroll through open when

this is the shortest path to the next position. The wheels do not scroll past open when

 is set to

.

DISPLAY

The display menu (→) determines whether the display remains lit or not. Select  to have

the display remain permanently lit, Select

 or  to extinguish the display two minutes or ten

minutes after the last key press.

To turn the display upside-down for easier reading, press [Up] and [Down] simultaneously.

The display intensity setting (

→) controls display brightness. You can select  for

automatic dimming of the display using the built-in light sensor, or manually select an intensity level from 10

to 100.

LAMP POWER

There are two settings that modify lamp control: Automatic Lamp On (→) and DMX Lamp-Off

(

→).

There are three options for automatic lamp control: , , and . When  is , the lamp

remains off until a lamp-on command is received from the controller. When

 is , the lamp strikes

automatically after the fixture is powered on. When

 is set to , the lamp strikes automatically

when the fixture receives DMX data, and it douses automatically after 15 minutes without receiving DMX

data. When ALON is set to either ON or DMX, lamp strike timing is determined by the fixture address to

prevent all lamps from striking at once.

The DMX lamp-off setting affects how the lamp can be doused. When

 is , lamp power can be

switched off by sending a DMX value from 248 to 255 on channel 1 for five seconds. When

 is ,

the lamp-off command will not work unless special conditions are met (see the DMX protocol on page 26 for

more details).

RESET

The fixture can be reset instantly from the controller if DMX reset (→) is set to . The reset

value must be held for 5 seconds to reset if DMX reset is set to

. If DMX reset is , resetting the

fixture via DMX will not work unless special conditions are met. Refer to the DMX protocol.

DIMMER CURVE

In →, the dimmer can be set up to either open and close in a linear manner () or

emulate the characteristics of a tungsten incandescent bulb (

).

STUDIO MODE

If → is set to , pan, tilt and effects movement speed is set to  (normal) and fans are

set to

 (temperature regulated operation) to give the quietest possible operation. Any existing speed

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comentarios a estos manuales

Sin comentarios

Martin MAC 250+ Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Controladores de dj Martin MAC 250+