Martin MAC 250+ Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
28 MAC 250 Wash
Control menu
Factory default settings are shown in bold type.
Menu Item Options Notes (default settings in bold print)

- (16-bit
mode)
1 - (16-bit
Extended mode)
DMX address (default address = )


16-bit

16-bit Extended



Map DMX pan control to tilt channel and vice versa.

Normal pan and tilt control


Reverse DMX pan control, right left

Normal pan control, left right


Reverse DMX tilt control, down up

Normal tilt control, up down


Normal pan/tilt speed

Maximum pan/tilt speed


Medium effects speed

Fast effects speed

Pan/tilt speed slave. Effects speed controlled by pan/tilt
speed setting.


Optimize effects for speed

Optimize effects for silence (studio mode).



Display remains on

Display extinguishes 2 minutes after last key press

Display extinguishes 10 minutes after last key press


Automatic display dimming
 -
Set display intensity manually


Enable DMX lamp off command

Disable DMX lamp off command (but allow DMX lamp off
if all 3 CMY channels are set to a value from 230 - 232 /
91%)


Enable DMX reset

Disable DMX reset (but allow DMX reset if all 3 CMY
channels are set to a value from 230 - 232 / 91%)

Allow DMX reset if reset command sent for 5 seconds


Lamp strikes automatically within 90 seconds of power on

No automatic lamp strike

Lamp strikes if DMX is present, douses after 15 mins. if no
DMX signal received


Effect wheels turn shortest distance

Effect wheels do not cross open position


Linear dimming curve

Tungsten dimming characteristics


CMY blackout after shutter closed for 3 seconds

No CMY blackout
Table 4: Control menu
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Comentarios a estos manuales

Sin comentarios