Martin MiniMAC Maestro Manual de usuario descargar pdf (Pagina 36)

Stand-alone operation

SCENE 01

Press [ID] [1] to select fixture 1. Press

[Pan/Tilt] and position the beam over

fixture 2’s beam at the top of the

triangle. Press [Effect/Focus] and

focus with [up] and [down]. Press

[Rotating/Index] and set the angle with

[left] and [right]. Press [Add] to create

and save the second scene with the

same fade and wait times as the first

scene.

Press [ID] [2] and similarly set fixture

2 to project over fixture 3 at the

bottom-left corner. Press [Add].

To use the same placement trick with fixture 3, first select fixture 1 and press [Prev]

to view scene r00. Then select and program fixture 3. Press [Add].

SCENE 02

Select fixture 1 and focus the gobo

in the bottom-left corner. Press

[Add]. Select fixture 2 and focus

the gobo in the bottom-right

corner. Press [Add]. Press [Prev]

[Prev] to scroll fixture 2 back to

scene r00 at the top of the triangle.

Focus fixture 3 at the top of the

triangle and press [Add].

EXECUTION

To run the sequence, press [ID] [1]

[2] [3] [Run/Stop]. During

execution the “r” in the display changes to a “P” on the master fixture and to an “S”

on the other fixtures.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 50 51

Sin comentarios

Martin MiniMAC Maestro Manual de usuario Pagina 36