Martin MiniMAC Maestro Manual de usuario descargar pdf (Pagina 8)

AC power

To install the main fuse

Fuses are provided for 100 - 130 V and 200 - 250 V operation. Use only the fuse

specified for the operating voltage.

1 Locate the bag containing the fuse for your AC voltage. Insert the fuse in the fuse

holder. The holder may be packed with the other fuse.

2 Remove the label covering the mains input socket.

3 Insert the fuse holder in the empty slot in the mains input socket (C).

To install a plug on the power cable

The power cable must be fitted with a grounding-type cord cap that fits your power

distribution system. Consult an electrician if you have any doubts about proper

installation.

• Following the cord cap manufacturer’s instructions, connect the yellow and green wire

to ground (earth), the brown wire to live, and the blue wire to neutral. The table below

shows some pin identification schemes.

To apply power

Warning! The power cables must be undamaged and rated for the

electrical requirements of all connected devices.

Important! Powering through a dimmer system can damage the fixture.

• Connect the prepared cable to the mains input socket and the AC mains distribution

system. Do not connect the fixture to a dimmer system.

Wire Pin Marking Screw color

brown live “L” yellow or brass

blue neutral “N” silver

yellow/green ground green

Table 1: Cord cap connections

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Sin comentarios

Martin MiniMAC Maestro Manual de usuario Pagina 8